WATER FILL VALVES

These valves replace water lost due to evaporation or small leaks in ponds and "Just-A-Falls" systems.  Mount inside skimmer or in our new water fill box below!

"BOX STYLE" FILL VALVE   Best Seller!

This durable fill valve is ideal since the float is contained inside the valve box.  No chance of damaging unit when lifting pumps in or out of skimmer.  Delivers up to 245 GPH at maximum of 55 PSI.  Includes fitting to connect to 1/2" vinyl tubing.  Fits in small or large skimmer.

BRASS FILL VALVES

These heavy duty brass fill valves are available in a variety of sizes with flow rates over 100 GPM!  Ideal for use in skimmers, vaults and the water fill box (below) for maintaining water levels in many different applications.  Brass body and brass rods are far superior to normal plastic fill valves.  All valve rods (arms) can be adjusted to fit your exact requirements.  WFS37, WFS50 and WFS100 come with plastic float, an optional 4" x 5" copper float is available.  WFS150 is only available with 6" copper float.

ELECTRONIC AUTO-FILL SYSTEM

This Levolor Brand electronic auto-fill is made exclusively for EasyPro and provides precise monitoring of water level.  The sensor is designed to mount onto any of our skimmers but can be used in a wide variety of other applications.

The sensor monitors the water level of the pond.  Whenever water in needed the sensor opens a solenoid valve allowing water into the pond.

Since the sensor is not located inside the skimmer and because it monitors before the filter pad or brushes, it is very accurate - no false readings due to waves or plugged filter pads!

The system comes with 1" solenoid valve, sensor module, 2" bulkhead fitting, necessary PVC pipe and fittings to connect to any skimmer.  Available in 115v or 230v.

WATER FILL BOX

Finding a good way to mount a water fill valve in a pond without a skimmer can be difficult.  Space can be a concern even inside a skimmer or in Just-A-Falls waterfall systems -- not anymore!  The EasyPro Water Fill Box provides an ideal housing in which to install an auto fill.  The box sits inside the liner and holds fill valves up to 13" long.  A 1" overflow is also included for ponds or formal pools needing exact water heights.  box measures 15" long x 8" wide (at top) x 8" tall (auto fill valve not included).