|
See our Distributor List for a location near you! HOME DISTRIBUTORS CONTACT INSTRUCTIONS PHOTOS TECHNICAL INFO CREDIT APPLICATION |
|
|
Aerators
|
REPLACEMENT FILTER MEDIA
EasyPro Ultra Bio-Media is a sinking media with a very high bio-film surface that is many times greater than other plastic media, such as bio balls, various mats and foams, beads, ribbon, brush type media, etc. Superior bacterial adhesion and colonization is achieved due to the surface texture and grade of plastic used. Under a patent pending process, Ultra Bio-Media is seeded with bacteria and barley to kick start the nitrification process. Ultra Bio-Media weighs approximately eight pounds per cubic foot. Media is sold and packaged by weight. Settling may occur in shipping. Ultra Bio-Media can be purchased by the cubic foot or bulk packed in 28 cubic foot Gaylord boxes. Approximately 500 square feet surface area per cubic foot!
FILTER FLOSS BIO-MEDIA
This loose plastic media from EasyPro will form to any shape and is hard so it will not compact. Ideal from deep applications where compaction is a concern. Bio-Balls are buoyant so trickle filter applications are best. Bio-Balls are 1-1/2" in diameter.
Bio-Blox filter media is an ultra high surface area media that is created from a variety of different filter thicknesses and densities. Bio-Blox is a loose fill media that is inexpensive and ideal for filling large filters. Use our mesh bags to hold Bio-Blox for easy handling. Approximately 525 sq. ft. of surface area per cubic foot. Sold by the cubic foot or in 24 cu. ft. Gaylord boxes.
This is our lowest cost filter material. The
bonded material is very soft and easily cuts to shape. Designed as
replacement material in aquarium and small garden pond filters, this material
can be washed and reused. Typical life expectancy would be one season.
Filter media is actually two pieces of media bonded together, one side is blue
and the other is white. Full rolls of material can be shipped UPS.
30 yards per roll.
The PFM3 is a polyester filter material that is very durable. Medium density for filtering fine particles. This material is ideal as replacement filter pads in many brands of small pumps, especially pumps with fountain nozzles where plugging is a concern. Can be easily cut to fit. Maximum UPS-able piece is 11 yards. PFM3B is a precut and boxed roll of material six yards long. 40 yards per roll.
PFM4 is a coarse material that has a high surface area for mechanical as well as biological filtration. The coarse design allows for high flows of water and yet a large surface area is available due to the honey combed design of the material. Can be washed and reused over and over! Maximum UPS-able roll is 11 yards. 40 yards per roll.
The PFM5 filter material is a 2" thick polyester material that can be washed over and over. We use this material in all sizes of our Aquafalls filters. The open weave allows for high water flow without clogging. Available in 28" wide rolls by the yard or in full rolls as well as in a 56" wide master roll in full roll lengths (30 yards). PFM5B is the maximum UPS-able roll in 28" widths and six yard lengths. PFM5F ships motor freight. 30 yards per roll.
|
|
|
ULTRA BIO-MEDIA 
E
asyPro Filter
Floss Bio-Media is ribbon type
material commonly used in our Aquafalls pond filters in place of lava rock. Filter Floss
is a flat strapping that is embossed on both sides creating additional surface
area for bacteria. Filter Floss Media is lightweight, will last
indefinitely and has no effect on water quality. Pond builders installing
our Aquafalls filters will find it easy to convince customers to upgrade to this
media since each media bag in the filter will weigh only 4 lbs. instead of 40
lbs. if filled with lava rock! This makes cleaning much easier! Each
box completely fills two mesh bags and contains approximately 4.5 cubic feet of
material.
BIO-BALLS
BIO-BLOX
PFM1 FILTER MATERIAL
PFM3
FILTER MATERIAL
PFM4 FILTER MATERIAL
PFM5
FILTER MATERIAL